Woodstock W1780 Compressed Air System, Typical filter/lubricator/regulator installation order

Model W1780 11⁄4" Brad Nailer

Compressed Air System

The Model W1780 is designed to be operated at 60-100 PSI using clean, dry, regulated, compressed air. Do not exceed the 120 PSI maximum pressure for your model.

Before using your new nailer, regulate the air pressure to the minimum PSI for your model.

An in-line filter/lubricator/regulator unit can be installed as depicted in Figure 1.

This filter/lubricator/regulator unit will protect your tool from damaging water build-up, allow you to adjust and maintain regulated air pressure, and save you the inconvenience of having to manually lubricate your tool every time you use it.

If you plan on installing a filter/ lubricator/regulator unit in your compressed air system, always follow the connection instructions that come with the unit.

Exceeding the maximum permissible operating pressure may damage the nailer and cause it to malfunction. To protect yourself from personal injury, DO NOT allow the air pressure to exceed the recommended pressure for this nailer!

������������ ����������

��������� ���������	���������
����	����
����	�����������

������

�������

�������� ������ ������

�������

Figure 1. Typical filter/lubricator/regulator installation order.

-5-