Model W1787
3⁄8" 2600 RPM Air Drill
Instruction Sheet
Phone #: (360)
EYE INJURY HAZARD! Always wear safety glasses during use to prevent serious personal injury!
INJURY HAZARD!
Always disconnect tool from air to
prevent unexpected operation dur- 
ing service!
INJURY HAZARD!
Never exceed 120 PSI!
Introduction
The Model W1787 is ideal for production drilling applications. It features a paddle switch with safety release, 2,600 RPM free speed and 3⁄8" drilling capac- ity. Recommended air pressure is 90 PSI and average air consumption is 6 CFM. Includes a 1⁄4" NPT air fitting and chuck key.
Inventory
Figure 1. Model W1787.
Quick | Quick | Lubricator | |
Connector | Connector | Regulator | |
Your |
|
| Air |
Tool |
|
| Compressor |
Quick |
|
|
|
Coupler |
| Quick |
|
| Air Hose | Filter | |
| Coupler | ||
|
| ||
Figure 2. Installing your tool.
A. | Air Drill | 1 |
B. | 1⁄4" NPT Air Fitting | 1 |
C. | Chuck Key | 1 |
Lubricating Your New Air Drill
Lubricate your air drill with pneumatic tool oil. If you do not have a lubricator installed in your air line, place
Figure 3. Lubricating directly into air
fitting.
COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC.
| WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT | |
#9574JM | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in China |
