Worksaver GLB-3000, GLB-330, GLB-340 Instructions, Tractor And Loader Requirements And Preparation

Models: GLB-3000 GLB-2200 GLB-340 GLB-330

1 25
Download 25 pages 7.98 Kb
Page 15
Image 15
INSTRUCTIONS

INSTRUCTIONS

TRACTOR AND LOADER

REQUIREMENTS AND

PREPARATION

——————————————————

The Bale Spear Attachments are designed to fit Loaders equipped with a tool carrier that accepts Global or Euro Hook Style attachments.

The required size of the tractor and front loader will be determined by the size and weight of the bales to be handled.

Remember, high moisture hay (silage) bales are very heavy in relation to similar size dry hay bales.

Always use a power unit/loader large enough to safely handle your bales.

Always be sure your power unit is properly counterbal- anced for a safe operation. TRACTOR AND LOADER It is a good practice to

use a loader with an equal or greater SAE operating load capacity.

The maximum recommended weight of large round bales that can be handled by the various single/two spear models and weights of rectangular bales that can be han- dled by three spear units are as follows:

Model

Spear Type

Bale Weight

GLB-2200

Forged

Up to 2200 lbs.

GLB-3000

Forged (2)

Up to 3000 lbs.

GLB-330

Forged (3)

Up to 3000 lbs.

GLB-340

Forged (3)

Up to 4000 lbs.

Check your tractor and front loader to make sure they are in good working condition. Check all loader mounting bolts to make sure they are tight.

Check the tractor’s hydraulic system. Be sure the hydraulic oil and filter have been serviced according to manufacturer’s recommendations. Refer to your tractor or loader operator’s manual or dealer for any adjustments necessary to put the hydraulic system in good working order.

Be sure tires and rims are in good condition. Inflate tires to the proper recommended air pressure.

CAUTION!

Be sure your tractor and loader is in good condi- tion. Read all the safety precautions and make sure all equipment operators are familiar with the safety rules of operation.

WARNING!

Power unit must be equipped with ROPS or ROPS cab and seat belt. Keep seat belt securely fastened. Falling off power unit can result in death from being run over or crushed. Keep foldable ROPS systems in “locked up” position at all times.

WARNING!

For multiple spear Models GLB-3000, GLB-330, GLB-340, always insert spears into the bale – NEVER under the bale. Failure to insert spears into bale can allow bale to roll back when loader is raised, causing serious injury or death.

Always use a tractor and front loader large enough to safely handle your bales.

Do not exceed the maximum recommended bale weight listed for each of the loader spear models. Damage to the equipment or serious personal injury could result.

A heavy load can cause instability in driving a tractor. Make sure the rear of the tractor is properly counter-balanced with weights. Always drive slowly

– especially around turns. An unstable tractor could steer badly and possibly tip over, causing injury or death.

14

Page 15
Image 15
Worksaver GLB-3000, GLB-330, GLB-340, GLB-2200 manual Instructions, Tractor And Loader Requirements And Preparation