BATTERY INSTALLATION
BATTERY REQUIREMENTS:
YOUR ROBOPET™ IS POWERED BY 4 X “AAA” SIZE BATTERIES (NOT INCLUDED).
YOUR REMOTE CONTROLLER IS POWERED BY 3 X “AAA” SIZE BATTERIES (NOT INCLUDED).
BATTERY INSTALLATION:
1.BEFORE INSTALLING OR CHANGING BATTERIES, ENSURE THE ROBOPET™’S ON/OFF SWITCH IS IN THE OFF POSITION.
2.REMOVE THE BATTERY COMPARTMENT COVERS USING A PHILLIPS OR CROSSHEAD SCREWDRIVER (NOT INCLUDED).
3.INSERT BATTERIES (NOT INCLUDED) INTO THE ROBOPET™ AND CONTROLLER AS SHOWN IN THE DIAGRAMS.
4.REPLACE THE BATTERY COMPARTMENT COVERS AND THE SCREWS.
ATTENTION: IMPORTANT BATTERY INFORMATION
1.5V | 1.5V | 1.5V | 1.5V | ||
LR03 | LR03 | LR03 | LR03 | ||
UM4 | UM4 | UM4 | UM4 | ||
“AAA” | “AAA” | “AAA” | “AAA” | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•USE ONLY FRESH BATTERIES OF THE REQUIRED SIZE AND RECOMMENDED TYPE.
•DO NOT MIX OLD AND NEW BATTERIES, DIFFERENT TYPES OF BATTERIES (STANDARD (CARBON ZINC),
ALKALINE, OR RECHARGEABLE), OR RECHARGEABLE BATTERIES OF DIFFERENT CAPACITIES.
•REMOVE RECHARGEABLE BATTERIES FROM THE TOY BEFORE RECHARGING THEM.
•RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED UNDER ADULT SUPERVISION.
•PLEASE RESPECT THE CORRECT POLARITY, (+) AND
•DO NOT TRY TO CHARGE
•DO NOT THROW BATTERIES INTO A FIRE.
•REPLACE ALL BATTERIES OF THE SAME TYPE/BRAND AT THE SAME TIME.
•THE SUPPLY TERMINALS ARE NOT TO BE SHORT CIRCUITED.
•REMOVE EXHAUSTED BATTERIES FROM THE TOY.
•BATTERIES SHOULD BE REPLACED BY ADULTS BECAUSE OF SMALL PARTS.
•REMOVE BATTERIES IF THE TOY IS NOT GOING TO BE PLAYED WITH FOR SOME TIME.
•THE PACKAGING SHOULD BE KEPT SINCE IT CONTAINS IMPORTANT INFORMATION.
BOTTOM VIEW OF THE ROBOPET™
1.5V 1.5V 1.5V
LR03 LR03 LR03
UM4 UM4 UM4 “AAA” “AAA” “AAA”
BOTTOM VIEW OF THE CONTROLLER
4