PRE-DELIVERY SERVICE OF MOWER BY DEALER

WARNING

Before proceeding with the Pre-Delivery Service of your mower, please read the safety instructions manual in its entirety. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower.

The Wright Mower is shipped completely assembled and has been adjusted and tested at the factory. However, due to the jostling of the shipping process and the delivery time lapse, the following items need to be repeated again before starting the mower. After you have uncrated the mower, follow these procedures in the order indicated:

Inspect the mower for any damage, unusual conditions or missing parts.

Inspect the mower for all of its decals, especially the warning decals. There should be one blade warning decal on each side of the deck, the “shield missing” decal under the blade belt cover, and the dash decal.

Check (and fill if necessary) engine oil level according to the engine manufacturer’s recommendation.

Check (and fill if necessary) hydraulic fluid level. Use fully SYNTHETIC oil: Mobil-1 15W-50 (see Hydro Check/Fill section of this manual).

Check rear tire pressure – 18 – 22 psi. is recommended. Use the higher pressures for heavier operators. Front Casters are equipped with non-pneumatic tires and do not require any air. Lowering tire pressure will affect deck pitch. Always check pitch any time tire pressure is set below recommended pressures.

Lubricate all appropriate moving parts (see the Lubrication section of this manual).

Check the battery to see that the cables are tight and connected properly. The battery is 12 volts and is a maintenance-free battery. Only charge the battery if it will not start the mower properly.

Add regular unleaded gasoline to fuel tank. (use a minimum of 87 octane gasoline) (You may use gasoline containing up to 10% ethanol and gasoline containing up to 5% of methanol.)

Check brake safety interlock.

Try starting the engine with the parking brake released. (Engine should not start. If engine starts, service the parking brake locking system)

Apply parking brake

Start the engine according to the engine manufacturer’s recommendation. Let the engine run at low - mid RPM for several minutes to ensure the engine oil reaches all of the engine parts and gets the hydraulic fluid circulating through the pumps, etc.

Check if the parking brake locking system prevents the units from being driven while engaged. If not, service the parking brake locking system.

Release the parking brake. Next, move the hand control levers, one at a time, to make the wheels move in forward and backward rotation.

Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to possible thrown objects from under the mower. No one should be near the mower deck or in its line of discharge at this or at any time. The discharge chute deflector should be in the down position.

Move the engine throttle control to ¾ RPM speed setting.

3

Page 3 Page 5
Page 4
Image 4
Wright Manufacturing 3228-33, 3234-33 owner manual PRE-DELIVERY Service of Mower by Dealer
Page 3 Page 5

3234-33, 3228-33 specifications

Wright Manufacturing, a leading name in the production of commercial lawn care equipment, has made a significant mark in the industry with its impressive model range, notably the 3228-33 and 3234-33 mowers. These models are designed for professionals who require reliable performance, durability, and superior maneuverability in various landscape conditions.

The Wright Manufacturing 3228-33 is a stand-on mower that combines compact design with powerful performance. The mower is equipped with a robust 33-inch cutting deck that allows for impressive maneuverability without sacrificing cutting efficiency. This model features a high-quality Kawasaki engine that delivers exceptional power and reliability, ensuring that users can tackle even the most challenging jobs with ease.

One of the standout technologies in the 3228-33 is its patented Wright deck design. This design provides a unique airflow pattern that facilitates superior grass clipping dispersal, enhancing the overall cutting quality. Furthermore, the mower incorporates an intuitive operator control system, allowing users to easily adjust their speed and cutting height for optimal performance in various conditions.

On the other hand, the Wright Manufacturing 3234-33 offers a similar yet amplified experience. This model features a larger 34-inch cutting deck, giving operators the ability to cover more ground efficiently while still maintaining the tight turning radius that Wright mowers are renowned for. The enhanced deck size is complemented by a powerful engine that ensures consistent performance throughout the day, making it ideal for larger properties or commercial applications.

Both models boast a user-friendly design with a comfortable stand-on platform, which minimizes fatigue during extended use. The platform is also equipped with vibration-dampening technology, ensuring a smooth ride over uneven terrain. Additionally, the mowers' heavy-duty construction is designed to withstand rigorous use, featuring a frame that can endure the daily demands of professional landscaping.

In terms of maintenance, both the 3228-33 and 3234-33 are designed for ease of service. Their accessible components make routine check-ups and repairs straightforward, minimizing downtime and keeping the mowers in peak condition.

Overall, Wright Manufacturing’s 3228-33 and 3234-33 models exemplify innovation and performance in commercial mowing. With their advanced features and durable construction, they are ideal options for landscaping professionals looking to enhance efficiency and deliver exceptional results. These models continue to represent Wright Manufacturing's commitment to delivering superior mowing solutions tailored for the landscape industry.
Top Page Image Contents