WARNING

User Clothing:

DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pants. Wear high- top leather work boots with thick, textured tread, soft-rubber soled at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform. NEVER wear loose-fitting clothing or jacket pockets that can get caught to the handlebars or control levers of any mower you drive. Wearing safety glasses, ear protection and safety shoes is advisable and required by some local ordinances and insurance regulations.

WARNING

Inspection of Mower Before Each Use:

DO NOT use the mower if any parts are not maintained in good operating condition. Examine the moving parts prior to each use. Look for excessive wear, bald or worn tires, cracks in parts, loose or missing bolts, cotter, linchpin or “hair” pins or cable yoke pins and replace before operating the mower. Make sure all safety equipment provided with the mower is in good operating order, including all the warning decals and the required operator-presence device which stops the engine and blades when the foot-operated Operator Presence Control (OPC) switch is released. (To test the OPC, follow instructions in the Operating Instructions section of this manual.) Inspect the two anti-tip rollers and their respective bolts at the rear of the mower for tightness and proper operation. Be sure that all parts of the hand-operated transmission control system are tight and secure. This is to reduce the possibility that the mower could have a loss of control or safety.

WARNING

Scheduled Mower Maintenance Safety:

Replace worn tire(s) with less than 3/32” of any tread groove left. Use tires with the tread pattern specified by Wright Mfg., Inc. only. DO NOT change the engine governor settings or over-rev the engine contrary to engine manufacturer specifications. Keep the Wright mower in good operating condition, and keep safety devices and shields in place and in working condition. Keep all nuts, bolts, and screws tight to be sure the

equipment is in safe working condition. Check the blade mounting bolts for proper tightness every eight (8) hours of operation. Check the blades for excessive wear and sharpness every four to eight (4-8) hours of operation. Replace excessively worn blades. Sharpen dull blades. The mower should not be used after the blades or other part of the mower strikes a foreign object, until conducting a thorough inspection and any damage is repaired. See the instructions in the Recommended Maintenance section of this manual for other items of required maintenance.

WARNING

Work Area Conditions and Inspection:

Prior to operating the unit, carefully inspect all lawn/ground areas where you plan to use the mower for hidden, hard-to-see objects or uneven ground that may be hidden in the grass. Clear the work area of moveable objects such as wires, rocks, glass, etc. that might be picked up by the mower and dangerously thrown. Remove, if possible, or mark the location of all immovable objects or irregular areas and be sure not to hit them with any part of the mower, its deck or the blades. Obstacles such as holes, abrupt changes in ground contour, tree trunks, stumps or roots, pipes protruding from the ground, paving edges, etc. in the path of operation can abruptly turn or stop the mower. This could throw you off the mower or into and possibly over the handle bars causing serious injury or death. The faster you are moving, the more potential there is for injury. Mow only in daylight or in good artificial light. Keep away from drop-offs, the edges of ponds, streams, pools, etc. especially at the bottom of slopes. Do not mow when children or others are around. When the Wright mower is in use, never direct the grass discharge toward bystanders, traffic, cars or buildings nor allow anyone near the machine while in operation. Thrown objects can pass through glass windows and some walls of buildings. There is extreme risk of danger from thrown objects or being cut by the blades of the mower or being run over if you lose control. Never operate the mower in an enclosed area without good, approved ventilation. Exhaust fumes are dangerous.

WARNING

Initial Operating Safety Guidelines:

•Read and understand the warnings on the instrument panel of the mower.

•Keep a firm hold on the stationary handle at all times.

•Keep both feet on the foot platform at all times.

•Know the controls and how to stop quickly.

7

Page 6 Page 8
Page 7
Image 7
Wright Manufacturing 43181 User Clothing, Scheduled Mower Maintenance Safety, Work Area Conditions and Inspection
Page 6 Page 8

43181 specifications

Wright Manufacturing 43181 stands out as a robust and efficient piece of equipment designed for professional landscapers and turf care specialists. This mower model combines advanced engineering with user-friendly features to deliver exceptional cutting performance while maintaining ease of operation.

One of the main features of the Wright Manufacturing 43181 is its innovative cutting deck design. The mower is equipped with a heavy-duty fabricated deck that supports efficient grass cutting and superior grass discharge. The mowing deck provides a clean cut every time, promoting healthier growth and an aesthetically pleasing lawn. Its commercial-grade construction ensures durability and long-lasting performance even in the toughest landscaping conditions.

The Wright 43181 boasts a powerful engine, providing ample horsepower to tackle thick grass and tough terrains. It utilizes a high-performance engine known for its reliability and fuel efficiency. This allows operators to work for extended periods without frequent stops for refueling. The mower's transmission system is designed for simplicity, featuring an easy-to-use control mechanism that allows quick adjustments based on the terrain and desired cutting height.

Ergonomics play a vital role in the design of the Wright Manufacturing 43181. The mower is equipped with a comfortable operator platform, which reduces fatigue during extended use. The adjustable controls are within easy reach, allowing operators to maintain consistent focus on their mowing tasks. Additionally, the unit has been designed to minimize vibrations, further enhancing comfort and precision during operation.

Technologically, the Wright 43181 features advancements that improve efficiency and operator experience. The incorporation of front swivel wheels offers superior maneuverability, allowing operators to navigate tight corners and intricate landscaping designs with ease. Moreover, the mower is designed for simple maintenance, with easily accessible components that make routine checks and repairs efficient.

Overall, Wright Manufacturing 43181 encapsulates a blend of performance, durability, and operator comfort. Its robust features and cutting-edge technologies make it an ideal choice for lawn care professionals seeking reliable machinery that can handle various landscaping challenges while delivering high-quality results.
Top Page Image Contents