front of the mower reduces the traction of the rear drive wheels and can cause the mower to slide or nose dive down hill. Use of the optional weight bar is determined by the width of cut of the mower and the operator’s weight. For 36” cut mowers, operators over 175 pounds may prefer the optional weight kit. For 52” cut mowers, operators over 225 may prefer the optional weight kit. Remember it is recommended that operators weigh at least 120 pounds and not more than 325 pounds. These are general guidelines only. The mower function and comfort will vary depending on mowing environment, operator driving style and preference.

• To reduce the chances of “popping-a-wheelie”, do not accelerate quickly.

Note: Excessively worn tire tread is dangerous. Replace tire(s) with less than 3/32” of any tread groove left. Use tires with the tread pattern recommended by Wright Mfg., Inc. only. Keep the tire pressure in the drive tires between 18 and 22 psi. Higher pressures will cause the tires to have less traction which may prevent safe operation.

WARNING

Fuel Safety

Handle gasoline with care – it is highly flammable. Do not smoke while handling gasoline. Use an approved gasoline container. Never remove the fuel cap or add gasoline to a running or hot engine or an engine that has not been allowed to cool for several minutes after running. Never fill the tank indoors and always clean up spilled gas. NEVER store the equipment with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

removed within a few hours by a doctor familiar with this form of injury or gangrene may result. Seek medical attention immediately. Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before starting your Wright mower. Hydraulic fluid is under high pressure. If you need service on your hydraulic system, please see your authorized Wright dealer.

Using a Spark Arrester

The engine in this machine is not equipped with a spark arrester muffler. It is in violation of California Public Resources Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal area may have similar laws.

Replacement Parts

Use of parts other than specified parts supplied by Wright Manufacturing, Inc. may compromise the safe use of the mower, are not recommended and their use could void the warranty. Always check with your Dealer or the Wright Mfg website for the latest Illustrated Parts List for your equipment.

Wright is fully concerned with your safety. Please read the above again and again until you fully understand the methods to promote the safest operation possible.

REMEMBER – YOUR MOWER CAN BE ONLY

AS SAFE AS THE OPERATOR.

FAILURE TO FOLLOW SAFE OPERATING

PRACTICES MAY RESULT IN

SERIOUS INJURY OR DEATH.

WARNING

Hydraulic Safety

Keep body and hands away from pin holes or fittings that eject hydraulic fluid under high pressure. Use paper or cardboard and not hands to search for leaks. Hydraulic fluid escaping under high pressure may have sufficient force to penetrate skin and cause serious injury. If foreign fluid is injected into the skin, it must be surgically

7

Page 10 Page 12
Page 11
Image 11
Wright Manufacturing 52083 owner manual Fuel Safety, Using a Spark Arrester, Replacement Parts, Hydraulic Safety
Page 10 Page 12

52083 specifications

Wright Manufacturing 52083 is an exceptional piece of equipment that stands out in the landscaping and turf maintenance industry. Known for its durability and efficiency, this model has become a preferred choice for professional landscapers and groundskeepers alike.

One of the main features of the Wright Manufacturing 52083 is its robust design, which is built to withstand the rigors of daily use. The frame is constructed from high-quality materials, ensuring it can handle various terrain types while maintaining stability and traction. This durability translates into a longer lifespan, making it a wise investment for businesses focused on long-term operational success.

The Wright Manufacturing 52083 is equipped with advanced cutting technologies that enable precise and efficient grass trimming. Its blade system is designed to provide a clean cut, promoting healthier grass growth. The cutting height can be easily adjusted, allowing users to customize their mowing experience based on the specific needs of the lawn being serviced. This feature is particularly invaluable for maintaining different grass types and for adapting to various landscaping conditions.

In terms of ease of use, the 52083 model boasts ergonomic controls that enhance user comfort during operation. The intuitive layout of the control panel allows landscapers to operate the machine smoothly without distraction. Additionally, the machine is designed to minimize noise and vibration, creating a more pleasant work environment.

Another noteworthy characteristic is the machine's fuel efficiency. The Wright Manufacturing 52083 incorporates modern engine technology that maximizes power while consuming less fuel. This feature not only reduces operational costs but also contributes to environmental sustainability, a consideration that resonates with many conscientious landscapers today.

Versatility is another strength of the Wright Manufacturing 52083. It is suitable for various applications, from mowing residential lawns to managing larger commercial properties. The compact design allows for easy maneuverability in tight spaces, while the powerful engine provides the capability to handle more extensive areas with ease.

In conclusion, the Wright Manufacturing 52083 stands out due to its robust construction, advanced cutting capabilities, user-friendly features, fuel efficiency, and versatility. It is an excellent choice for professionals seeking a reliable and high-performing lawn maintenance solution that meets the demands of the industry. Whether it is routine landscape maintenance or tackling challenging jobs, the Wright Manufacturing 52083 is engineered to deliver performance and efficiency.
Top Page Image Contents