Wright Manufacturing 98320009 Install New Deck Cover, For 48 Mower Deck, For 52 Mower Deck

Install New Deck Cover

For 48” Mower Deck

1.Place offset stud adapter on existing deck cover stud.

2.Secure in place with the supplied 3/8” flange nut. Do not tighten completely.

3.Place deck cover on mower deck and verify the correct stud location. Remove Cover and tighten nut.

4.Place another 3/8” nut on the stud adapter and adjust location to properly support deck cover when installed.

5.Place new deck cover on mower deck and tighten deck knob.

For 52” Mower Deck

1.Remove current deck stud and hardware

2.Attach original deck stud (previously removed) to

offset stud adapter using two 3/8” nuts. Flange face 48” Deck Cover Stud Configuration of nut should contact stud adapter. Tighten firmly.

3.Attach stud adapter, as shown, to the mower deck using the original mounting hole, and two 3/8” flange nuts. Flange face must contact deck surface. Do not tighten, until stud placement is verified by mounting deck cover.

4.Thread on another 3/8” nut, flange-sideup, onto the original deck stud. This will support the deck cover. Nut should be adjusted to allow proper support when deck cover is in place. Verify stud placement with cover and tighten stud to mower deck.

5. Place deck cover on mower deck and fasten.

For 61” Mower Deck

All 61” Deck machines will use the existing threaded deck stud and knob. Make any necessary adjustments to the deck cover stud to insure that the deck cover is level with the deck cover posts.