Installing Z Class RAM 5
Figure 3 Removing the cover
6. Remove the cover to expose the RAM module, as shown in Figure4.
Figure 4 Inserting RAM module
Warning
RAM modules may be susceptible to damage by Electro-Static Discharge
(ESD). All industry-standard cautions should be followed to avoid ESD.
Before you remove or install a module, touch any metal part of the chassis
and keep that contact with the chassis during the installation process.
7. Insert the new RAM module into the empty RAM module connector.
NOTE: If you are replacing the original RAM module, be sure to unlock the two locking
clamps at either side of the original module, remove the original module, and replace
the original module with a new RAM module.
Caution
If you are using two RAM modules, both modules must match in size.
8. Carefully press down on the RAM module until the locking clamps lock it into place.