USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER Version: 1.2
2 Installation 2.1 Hardware Installation
Step One: Place the X-Micro WLAN 11b Broadband Router to the best optimum
transmission location.
The best transmission location for your X-Micro WLAN 11b Broadband Router is
usually at the geographic center of your wireless network, with line of sign to all of
your mobile stations.
Step Two: Connect the X-Micro WLAN 11b Broadband Router to your wired network.
Connect the Ethernet WAN interface of X-Micro WLAN 11b Broadband Router by
category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable modem. A
straight-through Ethernet cable with appropriate cable length is needed.
Step Three: Supply DC power to the X-Micro WLAN 11b Broadband Router.
Use only the AC/DC power adapter supplied with the X-Micro WLAN 11b
Broadband Router; it may occur damage by using a different type of power adapter.
The hardware installation finished.
2.2 Software Installation
¾ There are no software drivers, patches or utilities installation needed, but only the
configuration setting. Please refer to chapter 3 for software configuration.
5