USER’S MANUAL OF X-Micro WLAN 11b ACCESS POINT Version: 2.0
previous configuration setting.
3.3.6 LAN Interface Setup
This page is used to configure the parameters for local area network that connects
to the LAN port of your Access Point. Here you may change the setting for IP
address, subnet mask, DHCP, etc.
Screenshot – LAN Interface Setup
Item D
escription

IP Address

If the DHCP Client function is disabled, fill in the IP
address of X-Micro WLAN 11b Access Point.

Subnet Mask

If the DHCP Client function is disabled, fill in the subnet
mask of X-Micro WLAN 11b Access Point.

Default Gateway

If the DHCP Client function is disabled, fill in the default
gateway for out going data packets.

DHCP Client

Select to enable or disable the DHCP client function from
pull-down menu.

802.1d Spanning Tree

Select to enable or disable the IEEE 802.1d Spanning
Tree function from pull-down menu.

Clone MAC Address

Fill in the MAC address that is the MAC address to be
14