1.Please complete the audio connection according to the section entitled “Standard Setups for Connecting to A VGA Monitor”.
2.Please make sure that the Xbox console and the X2VGA+ are powered off.
3.Connect the composite connector to the X2VGA+ “Audio In” port (please unplug the audio cable from the X2VGA+ ”Audio In” connector in advance), and connect the other end to the composite video in on a traditional TV set.
4.Regulate the triggers on the side of the X2VGA+, and set the first and second dipswitches to ON.
5.Verify that the steps above are correct, and then turn on the Xbox, ensuring that the X2VGA+ is powered off.
**The X2VGA+™ provides composite video output only while its power is turned off. If the power of the X2VGA+™ is turned on, the composite video output will automatically be closed.
**When finished using the composite video output, you must reset Switch 1, Switch 2 to the OFF position in order to go back to using the standard VGA monitor output.
Setting Synchronization Mode (advanced function)
The X2VGA+TM provides two synchronization modes, the separate H/V sync. (VESA Standard) and the composite sync. The separate H/V sync. is the default setting for X2VGA+TM (Switch 4: OFF). However, under some specific circumstances, you can also switch to the composite sync. (Switch 4: ON) through regulating the dip switches of X2VGA+TM.
**To avoid causing any crash or damage to either the Xbox console or the X2VGA+TM, please do not regulate the dip switches of X2VGA+TM when the power button is turned on.
**480i EasyView function can only function in the Separate H/V sync. mode.
Specifications
Dimensions (approximate)
136mm * 53mm * 30mm (w / d / h )
12