Xantech 282TP Connecting The Emitters, INSTALLATION SETUP #1 Home Theater \ Multi-room Controller

Models: 282TP

1 2
Download 2 pages 19.63 Kb
Page 2
Image 2
CONNECTING THE EMITTERS

CONNECTING THE EMITTERS

Simply insert the mono mini plug of the 282TP emitter into the “EMITTERS” or “OUT” jacks on any of the Xantech Connecting Blocks or Controllers.

CAUTION: DO NOT plug emitters into the IN/OUT or HIGH OUT jacks on the 790-00 and 791-44 Connecting Blocks. To do so will destroy the emitters!

The 282TP mouse emitter will also indicate the presence of stray IR or RF interference by randomly blinking when no IR control signal is being sent. Reposition the IR receiver of the interfering source to eliminate or reduce the random blinking. The more the random blinking is reduced, the better the system will function.

An optional shield, available from Xantech as model MS-1, fits over the emitter head and the sensor window of the controller component.

INSTALLATION SETUP #1:

Home Theater \ Multi-room Controller

The setup below shows two IR signals connected to a single source. This allows the source to be controlled from two areas. One mono plug goes to the connecting block. The other mono plug is connected to the MRC44 Controller.

INSTALLATION SETUP #2:

Expanded Multi-room Controller

The setup below shows two MRAUDIO4X4 Controllers connected in Expansion mode. Expansion mode doubles the number of zones while using the same number of sources. The benefit of the 282TP is that you only need to place one emitter at each source. One mono plug is connected to the ‘master’ controller. The other mono plug is connected to the ‘slave’ controller. This application can apply to the entire product line of Xantech controllers.

Limited Warranty

Xantech® warrants its products to be free pf defects in materials or workmanship. This warranty extends for one year from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.

08901676A

Page 2
Image 2
Xantech 282TP Connecting The Emitters, INSTALLATION SETUP #1 Home Theater \ Multi-room Controller, Limited Warranty