Then check to see if the Hidden Link IR Receiver operates the component.

•Sometimes interference will cause the red Talk-Back LED on the front of the Hidden Link IR Receiver to blink dimly, intermittently, or continuously.

•The Talk-Back Led should only blink when you are sending infrared commands to the Hidden Link IR receiver from a remote control.

•It may be necessary to move either the interfering source of the Hidden Link IR Receiver to achieve proper operation.

3.If the Talk-Back LED or the 286D Emitters do not blink when you are sending IR commands to the Hidden Link IR Receiver from a remote control, check the following:

• Make sure the power supply is plugged securely into a live

[BLANK PAGE]

AC electrical outlet.

 

•Be sure the stereo mini plug of the Hidden Link IR Receiver is plugged into the “IR RCVR” jack on the CB12 Connecting Block, not into the “OUT” jack.

•Check to see that all the mini plugs are properly seated into the mini jacks on the CB12 Connecting Block.

4.If the 286D Emitters blink, but the component does not respond, reposition the 286D Emitter(s). They may not be located directly over the component’s infrared receiving “window”. Consul the owner’s manual of the unit or the manufacturer for the exact location of the infrared “window”.

Limited Warranty

Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.

Xantech Corporation

13100 Telfair Ave. 2F, Sylmar CA 91342 Xantech.com

Installation Instructions, 29110D © 2008 Xantech Corporation

Document # 08905177A

This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

Page 2 Page 4
Page 3
Image 3
Xantech 29110D installation instructions Blank
Page 2 Page 4

29110D specifications

The Xantech 29110D is an advanced two-channel amplifier designed specifically for custom audio installations. With its compact design and robust capabilities, it is an optimal choice for integrators seeking superior sound performance within a wide range of applications.

One of the main features of the Xantech 29110D is its powerful amplification, delivering 10 watts per channel. This output ensures high-quality sound reproduction across various speaker types, making it suitable for both residential and commercial audio systems. The amplifier is engineered to provide clear, distortion-free audio, even at higher volumes, enhancing the listening experience in any environment.

The Xantech 29110D utilizes Class D amplification technology, known for its efficiency and compact form factor. Class D amps convert power more efficiently than traditional amplifiers, resulting in less heat generation and reduced energy consumption. This makes the 29110D not only an eco-friendly choice but also allows for flexible installation without the need for extensive cooling considerations.

Another notable characteristic of the 29110D is its versatility in connectivity options. It features both RCA and screw terminal inputs, making it compatible with a wide range of audio sources. This adaptability ensures that users can easily integrate the amplifier into existing audio systems without significant modifications. The amplifier also includes built-in protection against overheating, short circuits, and overloads, providing reliability and peace of mind for users in various settings.

The design of the Xantech 29110D reflects the brand's commitment to quality and durability. Housed in a compact and rugged casing, it is engineered to withstand the rigors of everyday use while maintaining its aesthetic appeal. The amplifier can be easily mounted in various locations, including in-wall installations, rack systems, or out of sight in cabinetry, making it an excellent solution for discreet audio setups.

Additionally, the Xantech 29110D is easy to use, featuring straightforward controls that allow for quick adjustments to volume levels and other settings. Its intuitive operation means that users, regardless of technical expertise, can enjoy a seamless audio experience.

In summary, the Xantech 29110D offers a combination of power, efficiency, and versatility, making it an excellent choice for any custom audio installation. With its Class D technology, robust protection features, and flexible connectivity options, it is a reliable and effective solution for achieving high-quality sound in a variety of environments.
Top Page Image Contents