Xantech 760-00 installation instructions Match Maker Speaker Volume Control, Specifications

INSTALLATION INSTRUCTIONS

760-00

MATCH MAKER™ SPEAKER VOLUME CONTROL

The Model 760-00 is an in-wall mountable stereo speaker volume control with impedance matching capability. From one to sixteen pairs of stereo speakers may be driven from one stereo power amplifier, using an equal number of 760's. It maintains correct impedance matching between the amplifier and the speakers by the use of instant setting S1, S4 and S8 jumpers on the control. This eliminates the need for separate impedance matching components in multi-room installations.

O U T P U T

L+ L– R– R+

®	760-00
SYLMAR,	SPEAKER CONTROL
	VOLUME
CA

R+ –R –L L+

T U P N I

Fig. 1 The 760-00

SPECIFICATIONS:

Type:	2 channel TRI-FI™ wound precision autoformers, with independent grounds.
Terminals:	Eight plug-in type screw terminals.

Power Rating: 25 Watts continuous, 150 Watts peak.

Freq.Response: 20-20,000 Hz ± 1dB at 1 watt.

Attenuation: 11 steps at 3 to 6 dB per step - 35 dB max. (Max. CCW position is OFF).

S1 setting: 0 dB @ Max. CW (pass-through position).

S4 setting:	9 dB @ Max. CW.
S8 setting:	13 dB @ Max. CW.
Impedance:	S1 setting: Pass-through position. i.e. 8 Ohms on OUTPUT reflects 8 Ohms to INPUT
	(Max. CW position).

S4 setting: 8 Ohms on OUTPUT reflects 32 Ohms to INPUT . Likewise, 4 Ohms on OUTPUT reflects 16 Ohms to INPUT (Max. CW position).

S8 setting: 8 Ohms on OUTPUT reflects 64 Ohms to INPUT. Likewise, 4 Ohms on OUTPUT reflects 32 Ohms to INPUT (Max. CW position).

Mounting: Fits most new construction junction boxes - uses single space.

Note: Will not fit certain retro-fit boxes, such as the Carlon 14 and 25 cu. inch series. Be sure to check fit before choosing J-boxes!

Dimensions: 1-5/8" W x 2-7/8" H x 2-5/16" D



1

Speakers & Volume Controls