Application Advisory

AA-04(Interfacing with Pioneer VSX-45TX)

In addition to the above IR Repeater setup, you will also need to enable the receiver as follows:

1.Configure the Multiroom setup for IR Receiver operation (see page 76 of the Pioneer VSX-45TX manual).

a.Turn ON the Receiver and press the SYSTEM Setup button on the Remote

b.Using the UP/DOWN cursors select the MULTI ROOM Menu

c.Select the IR Receiver sub-menu

d.Set the IR Receiver to OTHERS (choice is PIONEER or OTHERS) and exit the menu. This will disable the 5VDC

signal.

Note: If after making SYSTEM SETUP changes, the IR stops working, simply unplug the VSX-45TX from the AC Source, wait 5-10seconds and plug back in resetting the port.

Page 2 of 2

Page 2
Image 2
Xantech VSX-45TX manual Application Advisory