Xantrex Technology 150 manual Measured inverter output voltage is too low, Possible cause

Models: 150

1 28
Download 28 pages 58.16 Kb
Page 18
Image 18
Measured inverter output voltage is too low.

Possible cause

Suggested remedy

The lighter socket or the 12 volt outlet may require that the ignition be switched on.

The cigarette lighter fuse or the 12 volt outlet fuse is blown.

Turn the key to the accessory position.

Check the vehicle fuses, and replace the blown fuse with the correct type and size.

Measured inverter output voltage is too low.

Symptom The AC voltmeter reading is 5 to 15 volts too low.

Possible cause

Suggested remedy

A standard “average reading” AC voltmeter has been used to measure the output voltage.

For accuracy, the XPower 150 modified sine wave output needs to be measured with a “true RMS” voltmeter, like a Fluke 87 series multimeter.

The battery voltage is too low. Recharge the battery.

Battery operating time is less than expected. Symptom The inverter runs for a while, and then the Symptom The AC voltmeter reading is 5 to 15 volts too low.Manual backgroundManual backgroundManual backgroundManual background light comes on. The inverter is cool or warm to touch.

Possible cause

Suggested remedy

The battery is old or defective.

The battery is not being charged properly.

Replace the battery.

Have a qualified technician check the vehicle’s electrical system.

14

Page 18
Image 18
Xantrex Technology 150 manual Measured inverter output voltage is too low, Possible cause