8.4mm2
Hardwiring the Inverter to the Battery
A hardwired installation is illustrated in Figure 6.
Warning! Shock and fire hazard.
Use a qualified installer to perform a hardwired installation.
➄ |
| |
– | ||
| ||
| ① | |
| + | |
④ | ➂ | |
| ② |
Figure 6 Hardwiring the 500 Inverter to a 12 Volt Battery
①500 Inverter ② 8.4mm2 (8 AWG) red wire from the positive inverter terminal to the positive battery terminal (via the fuse and switch) ➂ 80 amp automotive fuse ④ 12 volt,
80 amp disconnect switch ➄ 12 volt battery
(8 AWG) black wire from the negative inverter terminal to the negative battery terminal.
To hardwire the inverter to a 12 volt battery:
1.Cut the clips off the cable clip wire assembly.
13