PROWatt Series

Troubleshooting Reference

This section affects all the above mentioned PROWatt products.

Problem

Possible Cause

Solution

 

 

 

 

No output voltage; the

GFCI trip fault, i.e., the

1.

Remove any AC loads.

GFCI LED light is on.

ground fault trip circuit

2.

Press the Reset button on the GFCI.

 

has been activated.

If it trips again a ground fault is present.

 

 

3.

Turn the inverter off and inspect all wiring for ground

 

 

 

faults.

 

 

4.

Correct any wiring that could have caused the ground

 

 

 

fault before turning the inverter back on.

 

 

5.

Press the Reset button on the GFCI, restoring output

 

 

 

voltage.

 

 

 

 

No output voltage; the

GFCI end of life fault,

1.

Remove any AC loads.

GFCI LED light is on.

i.e., the GFCI has

2.

Press the Reset button on the GFCI.

 

permanently ceased to

If the Reset button continues to pop out after being pressed,

 

function.

3.

Turn the inverter off and inspect all wiring for ground

 

 

 

faults.

 

 

4.

Correct any wiring that could have caused the ground

 

 

 

fault before turning the inverter back on.

 

 

5.

Press the Reset button on the GFCI, restoring output

 

 

 

voltage.

If the above procedure fails to restore power at the AC outlets, the GFCI has reached its end of life.

6.Take the inverter to the place of purchase and have it serviced.

Trademarks PROWatt Series is a trademark of Xantrex International. Xantrex is a registered trademark of Xantrex International. Other trademarks, registered trademarks, and product names are the property of their respective owners and are used herein for identification purposes only.

Notice of Copyright PROWatt 800/1000/1500/1750 Owner’s Guide Addendum © August 2007 Xantrex International. All rights reserved.

Exclusion for Documentation UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK; AND

(C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED XANTREX CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT WWW.XANTREX.COM.

Date and Revision August 2007 Rev A

Part Number 976-0159-01-01

Contact Information

 

Telephone:

1 800 670 0707 (toll free North America) 1 408 987 6030 (direct)

Fax:

1 800 994 7828 (toll free North America) 1 360 925 5143 (direct)

Email:

customerservice@xantrex.com

Web: www.xantrex.com

2

976-0159-01-01

Page 1 Page 2
Page 2
Image 2
Xantrex Technology 1750 Troubleshooting Reference, Problem Possible Cause Solution, Date and Revision August 2007 Rev a
Page 1 Page 2

1750, 1500, 800 specifications

Xantrex Technology is a well-regarded name in the field of power conversion solutions, particularly known for its advanced inverter and charger systems for various applications, including recreational vehicles, marine, and mobile power systems. Three of their popular models are the Xantrex inverter series: the 800, 1500, and 1750. Each model is designed to provide reliable, efficient power in a compact form factor, catering to different power needs.

The Xantrex 800 inverter delivers 800 watts of continuous power, making it suitable for smaller applications such as charging electronic devices, powering lights, or running small appliances. It combines a sine wave output with high-efficiency technology to ensure compatibility with sensitive electronics. One of its main features is an easy-to-use interface, typically including LED indicators, that allows users to monitor power status at a glance.

The Xantrex 1500 inverter ups the ante by offering 1500 watts of continuous power. It is particularly well-suited for larger loads, such as microwave ovens or small refrigerators. This model incorporates advanced power management technology, ensuring better load handling and energy efficiency. The built-in safety features, including over-voltage and over-temperature protection, enhance the reliability of this inverter for longer-term applications.

The Xantrex 1750 inverter is the most powerful among the three, delivering 1750 watts of continuous output. This model is ideal for users who require robust power supply capabilities, such as on extended camping trips or in off-grid scenarios. It features a user-friendly interface with digital displays that provide detailed information on power usage, battery status, and operational conditions. This inverter is designed with advanced technology to maximize efficiency and minimize power loss during operation.

All three models utilize pure sine wave technology, which is crucial for ensuring the safe operation of sensitive electronics. They also include features such as automatic shutdown in the event of excessive heating or other anomalies, ensuring protection for both the inverter and the devices connected to it. Additionally, compact and lightweight design makes these inverters easy to install and transport, making them ideal for a variety of mobile and stationary applications. Whether you require minimal power for small devices or a more robust system for larger loads, Xantrex Technology offers versatile inverter options to meet diverse needs.
Top Page Image Contents