Xantrex Technology Link 20 manual 20

F11 - Not Used
F12 - Not Used
F13 - Not Used
F14 - DISPLAY TEST
DEFAULT: OFF	RANGE: ON when SET button is depressed when
	this function is active.
	OFF when SET is released.

This function confirms proper operation of the Link 20 front panel display. When the SET button is pressed in the F14 mode, the two top left lights on the battery light bar willbeanorange/yellowcolor.Allotherlightswilldisplaytheirnormalcolorandthenumeric display will read -188.8. The display will return to normal when the SET button is released. Operation of the two right (green) lights on the battery light bar is confirmed when power is initially applied to your Link 20.

F15 - DISPLAY SOFTWARE REVISION NUMBER

Function F15 selects display of the software revision number. This number is used internally with Xantrex Technology to keep track of which version of software is installed in your Link 20. This number should be written down in the Setup table contained in this manual for your future reference.

20