23
When using a vehicle battery as a power source, it is
strongly recommended to start the vehicle every hour
or two to recharge the battery before its capacity drops
too low. The inverter module can operate while the
engine is running, but the normal voltage drop that
occurs during starting of the engine may trigger the
inverter’s low voltage shutdown feature.
Operation with the Powerpack
Follow these procedures and guidelines when using
the inverter module with the Powerpack.
1. When the inverter module is connected to the
Powerpack, the LEDs on both modules will glow
blue, indicating the inverter is ready and the
Powerpack is charged.
2. Plug the product(s) you want to operate into the
AC outlet or USB port and switch them on (if
necessary).
If the LED on the Powerpack glows red, it has been
discharged below 10% and needs to be recharged. See
“Recharging the Powerpack” on page 26.