The first two conditions ensure that the Truecharge 10 keeps your battery “topped up” if it is left permanently connected. The last two conditions ensure that the Truecharge 10 starts in a predictable fashion after you disconnect the battery or the AC power.

WARNING! To reduce the risk of sparking and damage to your Truecharge 10, always disconnect AC power from your Truecharge 10 before connecting or disconnecting the battery or batteries.

Important Safety Instructions

SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for the Truecharge 10 battery charger.

Do not expose charger to rain, snow, or spray.

Use of attachments not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure:

a)That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b)That extension cord is properly wired and in good electrical condition, and

c)That wire size is 18 AWG (0.8 mm2) or larger and cord is less than 100 feet (30 m) long.

Do not operate charger with damaged cord or plug. Replace the cord or plug immediately.

Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. If the charger is dam- aged, take it to a qualified service person.

Do not disassemble the charger. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electrical shock or fire.

To reduce risk of electrical shock, disconnect power from the charger

10