3270 Programmer’s Guide
IBM Related Functions
- 24 -
NOTE:
If the converter is connected directly to an IBM 4331
or 4361, the buffer size of 1920 characters (Function
Y1=2) should be specified, due to a hardware
restriction on the mainframe.
4.3. IBM RPQ Settings
The Functions 25 to 33 are similar to the RPQs you can order for an
IBM 3287 or IBM 3268 printer as shown in the following table. On the
IBM 4214, you may set the options from the front panel.
The charts below show the correspondence between interface
functions and IBM RPQ numbers.
Function no. 3287 RPQs 3268 RPQs 4214 RPQs
25 N/A*) N/A N/A
26 SC3750 SC9508 Opt. 20=3
27 SC3741 SC9505 Opt. 18=3
28 S30219 SC9501 Opt. 15=1
29 S30219 SC9502 Opt. 15=1
30 N/A SC9503 Opt. 16=2
31 SC3749 SC9504 Opt. 17=2
32 SC3739 SC9506 Opt. 19=1
33 SC3740 SC9507 Opt. 20=2
*) N/A: Not Applicable
Function no. 4028 RPQs 3812/16 RPQs 3912/16 RPQs
25 N/A*) N/A N/A
26 Set. 25 Switch C16
27 Set 31 Switch C22 PrintImage
28 Set. 27 Swtich C18 CR at MPP+1
29 Set. 28 Switch C19 NL at MPP+1
30 Set. 29 Switch C20 FF Data
31 Set. 30 Switch C21 FF Last
32 Set. 32 Switch C23 FF Valid
33 Set. 33 Switch C24 Auto Function
*) N/A: Not Applicable