Xerox 525/1050MX Print Engine, Pre- and Post-Processing Control, Paper Input and Output

The DocuPrint 525/1050, 525/1050MX Continuous Feed

The flagship in Xerox’s Continuous Feed family, it sets a new standard for productivity in any environment and now features MICR capability.

At 244 feet per minute, it’s our fastest continuous feed printing solution. With web capacity of 19.5 inches, it’s our widest. And 600 dpi resolution makes it our highest quality performer. You also get high-speed scalable RIPing, complex document

production, industry-leading reliability and the flexibility to process and print multiple data streams. This flexibility is now extended to include a new optional Customer Changeable Housing (CCH) to enable easy switching of the developer module to run MICR and non-MICR applications. The CCH kits are upgradeable, and it’s fully supported by Xerox’s end-to-end service—unmatched in the industry.

For more information on the Xerox DocuPrint®

525/1050 and 525/1050MX, call 1-800-ASK-XEROX

or visit us on the web at: www.xerox.com/print

S p e c i f i c a t i o n s

Print Engine Xerox DocuPrint® 525 (Simplex) Xerox DocuPrint® 1050 (Duplex)

•Pinless/pinfed switchable

•Blue laser diode technology

•Engine speed: 244 feet per minute (74.37 meters/minute) or 195 feet per minute (59.44 meters/minute) switchable

•Full-color touch-screen graphical user interface (GUI)

•Job setup and control while run

•Print engine controller:

—Double Xeon

—512 MB Memory/40 GB HDD

—Read/Write CD-ROM

—Synchronization Verification System (SVS)

—Markless Offset

Print Speed*

One-up

Two-up

One-up

Two-up

Three-up

Duplex Print Speed*

One-up

Two-up

One-up

Two-up Three-up

(up to):

(8.5” x 11")

(8.5” x 11")

(A4)

(A4)

(6” x 9")

(up to):

(8.5” x 11")

(8.5” x 11")

(A4)

(A4)

(6” x 9")

Landscape

Portrait

Landscape

Portrait

Portrait

Landscape

Portrait

Landscape

Portrait

Portrait

•

High

345

532

354

501

976

•

High

689

1064

708

1002

1952

•

Low

275

425

283

400

780

•

Low

551

852

566

801

1560

*Page sides per minute

* Page sides per minute; DP1050 simplex speed equals half of values shown

Pre- and Post-Processing Control
• Type 1 interface	• Xerox Print Line Bus (PLB)
• Xerox Print Line Bus (PLB)
	— Connects each device in print line via a Print Line Bus (PLB) box
— Connects each device in print line via a Print Line Bus (PLB) box
	— Monitoring of all devices in print line via a GUI
— Monitoring of all devices in print line via a GUI	— Up to 10 PLB interfaces per print line
— Up to 10 PLB interfaces per print line
	— Enables mix and match of various pre-/post-vendor devices
— Enables mix and match of various pre-/post-vendor devices	in same line
in same line

Physical Characteristics (per engine) and Configuration Options

•	Depth	39.76"/1010 mm	• Requires one DocuPrint 525 engine for the simplex configuration	Requires two DocuPrint engines plus a duplex kit for a duplex configuration.
•	Width	82.8"/2103 mm	• Customer Changeable Housing (CCH)—Optional	Total space requirements will be driven by configuration option:
•	Height	61.02 "/1550 mm	— MICR upgrade kit	•	In-line
•	Weight	US Version: 2,403 lbs	— Standard toner upgrade	•	90° Turn
		(1090 Kg)		•	Parallel Z
		EU Version: 2,425 lbs		•	MultiPlex (3 engines)

(1,100 Kg )• MICR supported in upstream engine only

Paper Support: pinless, pinfed, preprinted, plain, boxed fanfold forms and roll-fed paper				Paper Input and Output
• Paper Formats — Width (pinfed): 8.3"–19.5"/211 mm–495 mm	•	Printable Area	— Width (pinfed): 18.5"/470 mm maximum	• Up to 16"/406 mm high stack of fanfold
— Width (pinless): 8.0"–19.5"/203 mm–495 mm			(high quality); 19.0"/483 mm maximum (including	(i.e., 4000 sheets of 28 lbs/105 gsm) with
— Length 7"–14"/178 mm–356 mm by increments			the Mark Print Quality Area)	optional internal stacker
of .33" and .5" (with internal stacker)			— Width (pinless): 19.5"/495 mm maximum	• Input: Support for external third-party
— Length 5.83"–22" (target 28”) by increments of .167"			(high quality); 19.0"/483 mm maximum	unwinder solutions
(with post-processing equipment)			(including the Mark Print Quality Area)	• Output: Support for external third-party
— MICR supports pin-fed stock only			— Length (standard): 7"–14"/178 mm–356 mm	finishing solutions
			— Length (with external output): up to 17"/432 mm	• MICR output supported for internal
	•	Weight	— 16 lbs–28 lbs/60 gsm–105 gsm	stacker (optional)

Paper Weights

Environmental/Electrical Requirements

Mode

Speed

Simplex

Duplex

•

Operating temperature: 16° C–28° C

•

US Version:

Pinfed

High

60–127 gsm (16–34 lbs)

60–127 gsm (16–34 lbs)

or 60.8° F–82.4° F

— EMI: FCC Part 15 class A

Low

60–160 gsm (16–42 lbs)

60–127 gsm (16–34 lbs)

•

Recommended relative humidity: 20%

— Safety: UL 1950/CSA C22.2

Pinless

High/Low

60–105 gsm (16–28 lbs)

60–105 gsm (16–28 lbs)

to 80% (without condensation)

No. 950

•

Heat Dissipation: 13,000 Kcal/hr

•

EU Version:

Resolution

Supported Environments and Emulations

(51,310 BTU/hr)

— EMI: EN55022 class A

•

Noise output: Max 90dBA

— Safety: EN60950/EN60825

• Input resolution supported:

DocuPrint 525/1050:

•

US Version: 208/220/230/240 Volts

•

Stampa Controller

— 240 x 240 dots per inch

• IBM AFP via PSF™/MVS®, PSF/VM™,

+10%, –5%

— Xeon Processor, 3.0 Ghz

— 300 x 300 dots per inch

PSF/VSE™, PSF 400®, PSF/AIX®, PSF/OS/2®

•

EU Version: 380/400/415 Volts

processor speed

— 600 x 600 dots per inch

InfoPrint Manager for AIX®, InfoPrint Manager

+10%, –5%

•

Stampa Connectivity

• Print resolution switchable between:

for Windows NT™ and Windows 2000™

•

Power Consumption:

— Standard = Duplex Gigabit,

— 240 x 240 dots per inch

• Native IPDS (all AFP towers supported)

— Operating: 17.5 KVA (Average)

TCP/IP Link A 100 Mbits/

— 300 x 300 dots per inch

— IBM 3052-1

for 28 lb/105 gsm paper

1 Gigabit

— 600 x 600 dots per inch

— IBM 3800-3

— 11.5 KVA (Average) for

— IBM 3800-E (enhanced)

17 lb/64 gsm Paper

Interfaces and Connectivity

— OCE E-mode

— Standby: 3.5 KVA (Average)

• Up to 2 host connections per print engine

•

Optional data-stream support:

without the controller

— Xerox LCDS, PS, AFP via EOMS V-Services*

— PLB: 4W per box

• Up to 4 host connections for 1050 CF system

— PS, PCL, TIFF, PDF, ASCII via DocuSP®

— IBM Channel S/370 Interface

•

DocuPrint 525/1050 MX

— TCP/IP Ethernet 1 Gigabit

— IPDS and LCDS only

— TCP/IP Token Ring

— TCP/IP Ethernet 10/100

* Via third-party solution

© 2005 Xerox Corporation. All rights reserved. Xerox®

and DocuPrint® are trademarks of Xerox Corporation. Product appearance, build status and/or specifications are subject

to change without notice. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or Xerox Maintenance Agreement and is subject to certain restrictions.

In support of Xerox’s environmental leadership goals, this product may contain some recycled components that are reconditioned. Printed in U.S.A. 8/05

610P719370 A