Exercises
Upper Transport Area jam
Jams occur in this area only when the Second Feeder Module containing Trays 3 and 4 is connected.
1.Pull out the Transport Area drawer above Tray 1.
2.Lift up the handle.
3.Remove all jammed paper.
4.Return the drawer to its original position.
5.Follow the instructions on the UI to clear other areas or to resume your print job.
Transport Module jams
3a 
7c
3b
7b 
7a
Open the areas in the Transport Module indicated on the UI. Carefully remove all jammed paper.
1.Open the Transport Module door.
2.Grasp the green handles 3a, squeeze and move it to the right.
3.Carefully remove all jammed paper.
4.Reposition handles 3a.
5.Lift up green handles 3b.
6.Carefully remove all jammed paper and return handles 3b to the original position.
7.Follow the UI messages and, if required, lift handles 7a and remove all jammed paper. Return handles 7a to the original position.
8.Squeeze handles 7b and lower to the right. Remove all jammed paper. Return handles 7b to the original position.
9.Squeeze handles 7c and lower to the left. Remove all jammed paper. Return handles 7c to the original position.
10.Close the Transport Module door.
11.Follow the instructions on the UI to restart your print job.
DocuColor 7000AP/8000AP Quick Start Guide | 11 |