DocuColor 8000/7000 Operator Manual 3-31
3. Accessories
Paper specifications for staplingThe following chart shows the stapling details for paper size,
orientation, destination, and staple position. Numbers have been
rounded up or down.
NOTE: Stapled sets of large paper (A3, 11 x 17in. and greater)
may stack slightly skewed. The stapled sets will be of high quality.
Staple Positions marked with an "O" may be
selected in the position indicated. Positions
marked with an "x" are not available for
stapling.
XFront Corner = Single Staple Position 1
YRear Corner = Single Staple Position 2
Output
Destination Staple Position Output
Destination
Inches MM Sheet
Orientation
HCSS80
Stack Tray
64-220 g/m2
(stapling)
Front
cornerXRear
cornerYDual
HCSS80 Top
Tray
64-300 g/m2
(no stapling)
7.2 x 10.1 JIS B5 (182 x
257) SEF Yes O x x Yes
8.3 x 11.7 A4 (210 x 297) SEF Yes O O x Yes
8.5 x 11 216 x 279 SEF Yes O O x Yes
8.5 x 13 216 x 330 SEF Yes O O x Yes
8.5 x 14 216 x 356 SEF Yes O O x Yes
10.1 x
14.3
JIS B4 (257 x
364) SEF Yes O x x Yes
11 x 17 279 x 432 SEF Yes O x O Ye s
11.7 x
16.5
A3 (297 x 420) SEF Yes O x O Yes
12 x 18 305 x 457 SEF No -- -- -- Yes
12.6 x
17.7
320 x 450 SEF No -- -- -- Yes
7.2 x 10.1 B5 (182 x 257) LEF Yes O x x Ye s
8 x 10 203 x 254 LEF Ye s O x x Yes
8.3 x 11.7 A4 (210 x 297) LEF Ye s O x O Yes
8.5 x 11 216 x 279 LEF Yes O x O Ye s
10.5 x
15.3
Kai 8 (267 x
388) Asian
market size
SEF Yes O x x Yes
10.5 x 7.6 Kai 16 (267 x
194) Asian
market size
LEF Yes O x x Yes