Windows NT 4.x
3.Select the *.INF file, then click Open. Verify that the path and filename are correct, then click OK.
4.Select the correct printer, then click OK.
5.Enter a name for the printer, select whether you want that printer to be the default, then click OK.
6.Select one of these options:
■If the printer is not shared, click Next.
■If the printer is shared, enter a Share Name, check the Share box, then click Next.
Printing a Test Page
You are prompted to print a test page.
1.Select one of these options:
■Click Yes to print a test page, then click Next.
■Click No if you do not want to print a test page, then click Next.
2.Select one of these options:
■Click the Finish button if the data presented is correct. Proceed to step 3.
■Click the Back button to correct the data if incorrect, then click Finish when the data is correct. Proceed to Step 3.
3.If you printed a test page, you are prompted to confirm that the test page printed:
■Click Yes if the test page printed successfully.
■Click No if the test page did not print or printed incorrectly. Proceed to step 4.
4.Note the
Xerox TCP/IP Port Monitor
The Windows installer installs the Xerox TCP/IP Port Monitor for those installations using the PCL5c driver. The Xerox TCP/IP Port Monitor is used to add or remove TCP/IP ports.
Adding the TCP/IP Printer Port
1.Open Printer Properties for the printer you would like to attach to the new TCP/IP port.
2.Click Start, click Settings, then click Printers.
3.
4.Select the Ports tab, then click the Add Port button.
5.Select Other.
6.From the list of available