Xerox 96 manual Introduction, About this guide, Contents

Introduction

The Xerox DocuPrint Network Printer Series, Guide to Performing Routine Maintenance for Model 96, 4635, and 180 NPS, provides information on how to perform basic maintenance tasks on the Xerox DocuPrint Model 96, 4635, or 180.

About this guide

This guide is designed for operators whose job consists of operating each of the system components, running print jobs, solving simple system problems, and performing basic maintenance tasks, such as replenishing dry ink.

Refer to the entire Xerox DocuPrint Network Printer Series for information on other tasks required for printing with your DocuPrint printer.

Users should have an understanding of Printer Controller operations.

Before using this guide, become familiar with its contents and conventions.

Contents

This section lists the contents of this guide.

•Chapter 1, “Feeder trays,” provides information on how to load feeder trays for your DocuPrint printer.

•Chapter 2, “Output trays and bins,” describes how to unload output trays for the DocuPrint printer.

•Chapter 3, “Fuser lubricant,” describes how to refill the fuser agent reservoir, and how to replace the pressure roll wiper.

•

•

Chapter 4, “Adding dry ink,” describes how to add dry ink to the printer.

Chapter 5, “Replacing the dry ink waste container,” provides information on how to replace the dry ink waste container.

•Chapter 6, “Cleaning,” provides instructions on how to clean the various printing system components.

•Chapter 7, “Maintenance and support services,” provides information on how to call for service, obtain documentation and training, and report meter readings.

XEROX DOCUPRINT 96/4635/180 NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE vii