Xerox M123, M128 manual Feature Implementation Values

Feature		Implementation	Values
		<ESC>&l int X	Where int is:
			1～999
Simplex	@PJL SET DUPLEX =		Where value1 = OFF (simplex)
		value1
		<ESC>&l int S	Where int is one of the following:
			0 = simplex
Duplex	@PJL SET DUPLEX =		Where value1 = ON (duplex)
		value1	Where value2 is one of the following:
		@PJL SET BINDING =	LONGEDGE
		value2	SHORTEDGE
			(Use value2 combined with value1 =
			ON)
		<ESC>&l int S	Where int is one of the following:
			1 = Duplex long edge binding
			2 = Duplex short edge binding
Orientation	@PJL SET ORIENTATION		Where value is one of the following:
		= value	PORTRAIT
			LANDSCAPE
		<ESC>&l int O	Where int is one of the following:
			0 = Portrait
			1 = Landscape
			2 = Reverse portrait
			3 = Reverse landscape
Force short		@PJL SET	Where value is one of the following:
edge feeding		PAPERDIRECTION = value	SEF = Short Edge Feed
			LEF = Long Edge Feed
Job Mode	@PJL JOB MODE = value		Where value = PRINTER
Job Type		@PJL SET HOLD = value	Where value = PROOF (proof print)
		(see Example 3)
		@PJL SET HOLD = value	Where value = STORE (confidential
		@PJL SET	print)
		HOLDKEY="four-digit string"	The HOLDKEY variable acts as a password
		(see Example 4)	to release a job held by the Store value.
			The variable value is any four-digit
			value from 0000 to 9999. The default
			value is “”.

Page 14	WorkCentre M128/M123 Reference Guide
dc05cc0364