Xingtel Xiamen Electronics XL-2031IDW manual Receiving Call Records, Function Buttons

RECEIVING CALL RECORDS

A caller ID record consists of the following information:

FUNCTION BUTTONS

l Ringer Volume Switch - Set the ringer volume switch to the desired

level(HI/LO).To have the maximum ringer volume, move the switch to

the position. If you would prefer a gentle ringer volume, move the

9:52 9/12 NEW 02

TOTAL 04 MON

The total number of new calls Time and Date

Total number of calls and the week day

switch to the position.

l Speaker Volume Switch - Set the speaker volume switch to the

desired level(HI/LO).To have the maximum speaker volume, move the

switch to position. If you would prefer a gentle speaker volume,

9:52 9/12 CALL # 02 The serial number of caller list

12274612345	Caller's number
JOHN SMITH

Caller's name*

* This function should be supported by your local telephone company.

REVIEWING DISPLAY MESSAGES

move the switch to the position.

l Redial function - Lift the handset or press the	button, then press
the rd/p button to redial the last dialled number.

lSpeaker function - To switch your call to speaker phone, press the

button and hang up the handset. To switch back, simply pick up the handset and speak as normal. In the speaker state, you can dial the number and receive the call, also you can answer the call.

MESSAGE WAITING - If you have voice mail service from your telephone company and a recorded message is left, the screen will display "MESSAGE WAITING". "MSG" will then appear in the upper left corner. The icon will remain until you have reviewed your voice mail and the MESSAGE WAITING will be saved as a call.

NOTE: This function should be supported by your local telephone company.

NO CALLS - When all calls have been deleted. The display will show NO CALL.

MSG 9:52 9/12 CALL # 04

MESSAGE WAITING

9:52 9/12 CALL # 00

NO CALL

lR button - Press the R button to terminate a call and institute a dialling tone for another call or to get another call from "call waiting" (a special telephone service).

NOTE: If you do not have any special telephone service, such as call waiting, pressing the R button during a call may disconnect your current conversation.

lPause function - Allows you to insert a temporary pause during dialling sequence. For example, dialling an international number (eg: 011-886-22-795-1234), some telephone company systems will not register the entire number entry without a pause between the prefix numbers. You may have to dial 011- rd/p, dial 886 - rd/p. This allows adequate timing for the phone number to register with the telephone company's system and complete the call.

15 4