XS Scuba Buoyancy Compensator Integrated Weight Systems, Cylinder Band with Buckle, Sternum Strap

.8 BC Owner’s Manual

Cylinder Band with Buckle

This mechanism attaches your BC to your cylinder so that it is securely held at the desired height, without slipping. Some models are equipped with the exclusive Micro Pac™ and two cylinder bands for extra support.

The nylon webbing should already be woven through the buckle(s), but instructions for re-weaving are provided in the following section, titled Preparation & Setup.

Tank Locator Strap

To ensure that your BC is set at the correct height on the cylinder, simply loop this strap over the cylinder valve and adjust it to raise or lower the BC. Then, fasten the cylinder band(s).

Sternum Strap

Most models are equipped with this feature, or it can be purchased separately as an accessory option. Using two dimes, you can disassemble the post pin on the female buckle to reverse the strap’s direction, or remove it altogether.

Integrated Weight Systems

Some XS Scuba BC models are equipped with built-in compartments and pockets to hold X-Lock™ Integrated Weight System and trim weights. Either “soft weight” (pouches filled with lead shot) or solid weight can be used, but soft weight is strongly recommended, since it will fill the weight compartment to its fullest capacity and provide the maximum comfort.

If your XS Scuba BC is a weight integrated model, it is very important to read the following instructions in order to understand the difference between these two types of weight pockets and how to use them correctly. For installation and removal instructions, see the following section, titled Preparation & Setup.

XS Scuba, Inc