Xtant manual XTANT 3150X SPECIFICATIONS

XTANT 3150X SPECIFICATIONS

Frequency Response	5 Hz to 50 kHz +/– 1 dB
Number of Channels	3
Watts per Channel @ 4Ω	2 x 25 + 1 x 100
Watts per Channel @ 2Ω	2 x 50 + 1 x 200
Bridged Mono @ 4Ω (Stereo Channels)	1 x 100
Recommended Load (stereo channels)	>2Ω Stereo / >4Ω Bridged
Recommended Load (Mono channel)	>2Ω
Distortion (THD)	< .04%

Measured: 20 Hz to 20 kHz at rated power, all channels driven 4Ω

Signal to Noise Ratio > 100 dB

Measured: A-weighted in 20 kHz noise bandwidth @ 1 volt sensitivity

Damping Factor	> 200 @ 100 Hz with 4Ω load
Input Sensitivity	100 mV to 8.5 V RMS Unbalanced Source
	100 mV to 17 V RMS Balanced Source

Input to Line Output Gain 0 dB +/– 20 dB, Selectable in 10 dB steps

On-Board Crossover	12 dB per Octave “Butterworth”
Module Port(s)	2 – Accessory and 2 – Balanced Line
Power Supply	Fully Regulated, PWM
Operational Voltage	11 to 15 Volts
Fusing	50 Amp
Warranty	Limited 4 Year Parts and Labor

S E E P A G E E L E V E N O F T H I S M A N U A L F O R C O M P L E T E D E T A I L S

6