Yamaha 90 CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER, Using one unit, Using two units

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER

•Connect the main speakers to the speaker output terminals of the amplifier.

•Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.

•To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal.

Using one unit

Left speaker This unit

OUTPUT	INPUT2		AUTO	PHASE	BASS
		STANDBY
TO SPEAKERS

Right speaker

LOW HIGH NOM REV MOVIE MUSIC

FROM AMPLIFIER	OFF
INPUT1

To AC outlet	‹YAMAHA DSP amplifier›	Pin plug
		cords
	SUBWOOFER
Amplifier	‹Amplifier›

PRE OUT

Using two units

Left speaker						Right speaker
OUTPUT	INPUT2 AUTO	PHASE	BASS	OUTPUT	INPUT2 AUTO	PHASE BASS
TO SPEAKERS	STANDBY			TO SPEAKERS	STANDBY
	LOW HIGH	NOM REV	MOVIE MUSIC		LOW HIGH	NOM REV MOVIE MUSIC
FROM AMPLIFIER	OFF			FROM AMPLIFIER	OFF
INPUT1				INPUT1		Pin plug
This unit	This unit					cords

Amplifier

To AC outlet To AC outlet

Notes on the above connections

•When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound.

•When connecting this unit to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.

•For using a power amplifier and a preamplifier, the preamplifier must have two sets of PRE OUT terminals. If your preamplifier has only one set of PRE OUT, connect this unit to the speaker terminals. (See page 4.)

6