Using the PURE DIRECT switch

You can enjoy the purest possible sound from your audio sources by setting this switch so that the indicator illuminates. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE and LOUDNESS controls, the SUBSONIC FILTER switch and the PRE OUT/MAIN IN terminals, eliminating any alterations to the audio signal.

PURE

DIRECT

Setting the PHONO switch

Select either MM or MC position depending on your PHONO cartridge, Moving Magnet or Moving Coil type. However, if you use a high output MC cartridge, select MM position.

PHONO

MC

MM

English

Setting the SUBSONIC FILTER switch

If you set this switch to “ON” position, undesirable ultra-low- frequency signals caused by turntable rumble or warped records can be cut out without losing sound quality.

SUBSONIC

FILTER

ON

OFF

Setting the MODE switch

<For AX-1070 only>

This switch can be used for switching between stereo and monaural operation. Normally this switch should be set to the STEREO position.

MODE

MONO

STEREO

When you listen with headphones

Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

PHONES

11