Detailed settings for recording and playback [FILE/SONG SETTING]
CLP-380 Owner’s Manual
84
Detailed Settings
You can select a single channel to listen to its contents.
Playback starts from the first note.
See the procedure on page 80.
Setting range:
Ch1 – Ch16
The song data consists of 16 channels. A channel is assigned to a part,
so in this instrument, channel means the same as part.
Even channels that contain no data are displayed.
You can delete data from each of 16 channels.
See the procedure on page 80.
Setting range:
Ch1 – Ch16, ALL (all channels)
The song data consists of 16 channels. A channel is assigned to a part,
so in this instrument, channel means the same as part.
Even channels that contain no data are displayed.
When you clear all channels using the “ALL” parameter, you can overwrite
the song. In this case, the file which contains song settings with no
channel data is saved.
Auditioning the channels
[ChannelListen]
B
D
NO YES
A
C
ChannelListen Start?-->
Ch1
Playback continues as long as you press
and hold down this button.
Select the desired channel for playback.
TIP
TIP
Deleting data from each channel
[ChannelClear]
B
D
NO YES
A
C
ChannelClear Execute?-->
Ch1
Delete data.
Select the desired channel for deletion.
TIP
TIP
TIP
For information on the settings “RecStart” and “RecEnd,” see “Re-recording a song
partially” on page 33.
For information on the setting “RecExtraPartsCh,” see “Recording a performance of several
different parts” on page 35.