Detailed settings for the voices [VOICE SETTING]
CLP-380 Owner’s Manual 91
Detailed Settings
See the procedure on page 80.
Setting range:
-12 – +12 dB
See the procedure on page 80.
Setting range:
500 Hz – 16.0 kHz
See the procedure on page 80.
Setting range:
-12 – +12 dB
This parameter enables determines the manner and
degree to which the volume level changes in response to
your touch on the keyboard (how hard you play). Since
the volume level of the harpsichords and pipe organs do
not change regardless of how you play the keyboard, the
normal setting for these voices is 127. (See the setting
range below.)
See the procedure on page 80.
In Dual mode:
Setting range:
0 (softest) – 64 (largest changes in the level) – 127 (loudest and
fixed)
Adjusting the low-range gain (amount
of boost/cut) of the equalizer*
[EQ LowGain]
Adjusting the high-range frequency of
the equalizer*
[EQ HighFreq. (EQ H.Freq)]
Adjusting the high-range gain
(amount of boost/cut) of the
equalizer*
[EQ HighGain]
B
D
NO YES
A
C
Main Set?-->
EQ LowGain 0
B
D
NO YES
A
C
Main Set?-->
EQ HighFreq. 500
B
D
NO YES
A
C
Main Set?-->
EQ HighGain 0
Setting the touch sensitivity
[TouchSense]*
B
D
NO YES
A
C
Main Set?-->
TouchSense 64
B
D
NO YES
A
C
MainxLayer Set?-->
TouchSense(GrndPno1) 64
Voice for editing (Voice 1 or Voice 2)