■To stop play temporarily

or

On the front panel

To resume play, press the d button again (or press the w button).

*The w/d button on the front panel can also be used to stop play temporarily or to resume play.

■To stop play completely

or

On the front panel

■To turn off the powerPress the POWER switch again.

POWER

On the front panel

BASIC OPERATION

PLAYXCHANGE

During play, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc play. However, in this case, pressing the DISC SKIP buttons has no effect. You can load or replace discs on the trays when the disc tray is opening, however, never load a disc on the tray hidden inside the unit. If doing so, the disc and the unit may be damaged, because the tray already has a disc, which is being played.

CDS PLAYING

Scanning Discs

■This mode is convenient to search for a desired disc (or to check discson the disc tray)

When the DISC SCAN button is pressed in stop mode, this unit will play a section of each disc in turn for 8 seconds.

If, during this play, you find a disc that you want to listen to, press the DISC SCAN button once again or press the w button to cancel this function. The unit will enter into the normal play mode.

DISC SCAN

Notes

•During this play, the disc tray numbers blink in the display. Every time the play of a disc is finished, the corresponding tray number is changed from flashing to lighting.

•If the disc being played has a long blank space between tracks, you will hear no sound during disc scan.

English

E-9