CONNECTIONS

●Before making any connections, switch OFF the power to the unit and the amplifier or other component.

●Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used.

●Be sure that the left (L) and right (R) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component.

●If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other.

This unit To AC outletConnection cord (included)Amplifier

4