Troubleshooting
Troubleshooting
If CDR200tx is not performing as expected, look up the symptoms in the following table, then see what to do.
Symptoms | What to Do |
|
|
The power to the CDR200tx is off | • Check the AC power cable connection. |
|
|
The power to the computer is off | • Check to see if the SCSI card is correctly |
| installed. |
|
|
The CDR200tx is not recognized by | • Check the SCSI cable connection. |
the computer. | • Make sure that SCSI ID numbers are assigned |
| |
| exclusively. |
| • Make sure that the last device in the SCSI daisy |
| chain is terminated correctly. |
|
|
The CDR200tx does not operate | • Install the SCSI driver software again. |
correctly |
|
|
|
The disc tray will not open | • Make sure that the power to the drive is turned |
| on. |
|
|
The disc ejects | • Make sure that the disc is seated in the tray cor- |
| rectly. |
|
|
Incorrect operation | • Make sure that the disc is seated in the tray cor- |
| rectly. |
| • Make sure that you are using the correct disc. |
| • Make sure that there is no dust, dirt, or conden- |
| sation on the disc or tray. |
|
|
12