mManual tape-programming
This is for recording desired tracks in any order onto a tape.4
3, 5
SYNCHRO | DIMMER | OPEN/ |
|
|
CLOSE | REPEAT | RANDOM | ||
|
|
| ||
SPACE | TEXT/ | PEAK | 7 |
|
TIME |
| |||
|
|
|
| |
TAPE | CLEAR | PROG | 2 | 6, 7 |
1 | 2 | 3 |
| |
4 | 5 | 6 |
|
|
7 | 8 | 9 |
|
|
0 | +I0 | INDEX |
2 | Press PROG. | Blinks. |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| ||
|
| PROGRAM | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 10 | A |
|
|
| 11 12 |
|
|
|
|
|
|
|
| |
| PROG |
|
|
|
|
|
|
|
|
|
|
|
|
| Blinks. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| ||||||||
|
| PROGRAM |
|
|
|
|
|
|
|
|
|
|
|
| A | TOTAL |
|
|
|
|
|
|
|
|
|
|
|
| REMAIN |
|
|
|
|
|
|
|
|
|
Blinks.
3 Use numeric buttons to select desired tracks (to be recorded on side A) in any order.
1 2 3
4 5 6
7 8 9
0 +I0
*Programmed track numbers light up on the display. You can select a track which can be programmed for the remaining time on side A from track numbers flashing on the display. You cannot, however, select a track number extinguished from the display.
4 When track selection for side A is finished, pressTAPE.TAPE
A pause is inserted.5 Use numeric buttons to select the track numbers (to be recorded on side B) in any order.
1 2 3
4 5 6
7 8 9
0 +I0
6 Begin recording on the tape deck, and then press
on this unit.7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording,
and then press 
or 
on this unit.
Notes
cIf, in step 3 or 5, “ERROR” or “E rr” appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the tape. However, at this time, if any other track number is flashing continuously on the display, you can program it instead of the unprogrammable one.
cIn step 3 or 5, each time a selection is made, the track number and the tape’s remaining time will be displayed, and then the display will change to indicate the next program number.
cTo check, cancel or correct program data, refer to page 15.
*When checking program data, note that “PAUSE” or “Pu” appears between track numbers for side A and side B.
cUp to 40 tracks can be programmed. If, however, a pause is inserted, it is counted as one track.
cCD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 6 and 7, press
SYNCHRO and then press 
on this unit’s remote control. Recording automatically begins. (For details, refer to page 21.)