CD SYNCHRONIZED RECORDING
This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and more precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.)
*This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control transmitter.
English
3
4
SYNCHRO |
| DIMMER | TIME | OPEN/ | 1 |
| CLOSE | ||||
SPACE | PEAK | TAPE | CLEAR | PROG |
|
1 | 2 |
| 3 | INDEX |
|
|
|
|
|
| |
4 | 5 |
| 6 | +I0 |
|
7 | 8 |
| 9 | 0 |
|
REPEAT RANDOM
|
| SEARCH |
– OUTPUT LEVEL | + | SKIP |
STOP | PAUSE | PLAY |
4
5
1 Load the disc.
OPEN/
CLOSE
2 Load a tape on the tape deck.
*The peak level search function of this unit is useful for adjusting the recording level on the tape deck. (Refer to page 18.)
3
SYNCHRO
This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.
*In this mode, the time display on this unit flashes on and off.
4 If necessary, select a desired track.
5 | SKIP |
or
5
PLAY
Both CD play and tape deck recording begin.
* CD play begins a little later than recording starts.
6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3 – 5 again.
To cancel this function
Press the STOP button.
Notes
•To finish or stop the recording, press the stop button on your tape deck.
•A programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 13 – 14 for the programming procedure.)
•This function can also be used together with the automatic
19