36 CLP-811/611 Configuration Functions (FUNCTION mode)
3At the Clavinova, select function F13 and move to
subfunction 13-8 BulkDump.
4Press [+/YES] to begin the dump.
The screen displays Working while transmission is in
progress, and then Completed to indicate that the
operation is finished. It then returns to the original
Bulk Dump screen.
5When transfer is finished, you can terminate FUNCTION
mode and resume normal play.
To reload the saved data:
1. Run a MIDI cable from MIDI OUT on the storage device
to MIDI IN at the Clavinova.
2. Start transmission from the storage device. (Refer to the
device’s operation manual.)
The Clavinova automatically receives and restores the
incoming data. The restored data is then available for
normal playback.
NOTE
• It is not possible to reload data into a different
Clavinova model. Data from a CLP-811, for
example, can be loaded into another CLP-811,
but not into a CLP-611.
• You cannot send or receive bulk data while the
Clavinova is in RECORDING mode or while it
is playing back recorded data.
• You cannot receive bulk data while the
Clavinova is in FUNCTION mode.
• When transmitting bulk data, the Clavinava
will not transmit other types of MIDI data and
will not recognize incoming MIDI messages.
(On CLP-811 only:)
F14.MicRevDpt (Microphone reverb depth)
This function sets the reverb depth (intensity of
reverb effect) applied to microphone input. (Note
that this function is not available on the CLP-611.)
1To access this setting, enter FUNCTION mode and go
to main function F14.
2Press [-/NO] or [+/YES] to change the setting.
Values: 0,...,20
Default: 10
F14/F15.Backup (Backup ON/OFF settings)
(F14 on the CLP-611; F15 on the CLP-811.)
The Clavinova’s backup feature allows you to retain selected
settings while power is off so that they can be restored when
power comes back ON. Each BACKUP subfunction sets
backup ON or OFF for a specific group of settings.
• If backup for a group is set OFF, all settings within that
group return to their factory defaults each time power comes
on. (A listing of factory defaults appears on page 47.) If
backup is set ON, then existing settings are automatically
restored.
• Memory backup remains effective for about a week, after
which all settings will return to their factory defaults. If you
wish to retain your settings for a long period of time, please
be sure to switch the Clavinova on for at least a few minutes
each week.
1To access this setting, enter FUNCTION mode and go
to the main function F14 (CLP-611) or F15 (CLP-811).
2Next, press [+/YES] to enter the subfunction group.
Then use [t], [s] to move among the different
subfunctions, and [-/NO], [+/YES] to set the values.
Subfunctions
14.1/15.1 Voice (Voice settings)
14.2/15.2 MIDI (MIDI settings)
14.3/15.3 Tune (Tuning and temperament set-
tings)
14.4/15.4 Pedal (Pedal settings)
14.5/15.5 Display (Display mode)
Values: ON, OFF
Default: OFF*
* But note that the Backup ON/OFF settings themselves, as
well as recorded performance data, are always backed up.
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
21
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
21