Yamaha CLP-611, CLP-811

Getting Ready

Music Stand

CLP-811

To raise the stand:

1. Using two hands, take hold of the left and right sides

of the music stand. Lift the stand upwards while at

the same time rotating the top of the stand toward

you.

2. Push the stand down into place so that the opening

on the base of the stand fits onto the small notch on

the plastic hook.

To retract the stand:

Lift the stand straight up off the notch, then rotate it

backwards and return it to its original position.

CLP-611

To raise the stand:

1. Lift the stand forward as far as it will go.

2. Flip down the two metal supports at the bottom rear

of the stand.

3. Lower the stand downward slightly so that it comes

to rest on the metal supports.

To lower the stand:

1. Lean the stand forward as far as it will go.

2. Raise the two metal supports (at the back of the

stand) so that they are flush with the stand.

3. Gently lower the stand backward until it is all the

way down.

NOTE

Please do not try to use the stand in half-raised

position. When raising or lowering the stand, always

hold on to it until it is securely in place.

Key Cover

To open the cover:

1. Lift the cover slightly (not too much).

2. Gently slide the cover open.

To close the cover:

1. Slide the cover all the way forward, holding it firmly

so that it can’t drop down.

2. Gently lower the cover over the keys.

Hold the cover with both hands when moving it, and do not release it until it is fully opened

or closed. Be careful to avoid catching fingers (your and others’,) between the cover and the

main unit.

Be careful of fingers when opening or closing.

CLP-811/611 Getting Ready