Yamaha CRX-E500 INPUT, TIMER, TIMER, DISPLAY, DISPLAY, HOUR MIN, (Example), TIMERINPUT, STANDBY/ ON, 4.ON Time, 5.OFF Time, 3.Timer REC, 2.Timer Input, 1 Press DISPLAY

USING THE BUILT-IN TIMER

Before using the timer

If you want to use the cassette deck, KX-E300 or the MD Recorder, MDX-E300 for timer play or recording, you must first make the connections as shown in “Connecting the system” on page 6. For details, refer to the instructions supplied with the MDX-E300 or KX-E300.

3.Timer REC

Select the recording component by turning INPUT. If you like to enjoy timer play with TUNER or AUX, select “REC Mode OFF”.

(Example)

Timer play and recording

By using the built-in timer, you can have the unit turn on at a specified time and begin playing or recording automatically. You can also specify the turn off time.

DISPLAY	HOUR MIN
	VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400

STANDBY/ON

TIMER	DISPLAY	MEMORY	AUTO/MAN'L PRESET/BAND	PRESET/TUNING	MIN	MAX
		TIMER ADJ	TIMER	HOUR	MIN	INPUT
						INPUT
		BASS	TREBLE	BALANCE
PHONES

–

TIMERINPUT1 Press DISPLAY.Whenever DISPLAY is pressed, the display mode changes as follows:1.Clock Time (TIMER on/off mode)

If you have not set the clock yet “Set Clock” appears. You need to set the current time as described on page 7.

2.Timer InputSelect the source to be played by turning INPUT.•Timer recording is possible only when you select TUNER or AUX.

4.ON Time

“ON Time” appears on the display for a second, and changed to the time setting mode.

Press HOUR to set the hour. Press MIN to set the minute.5.OFF TimeSet the time the same way as above.

If you set the ON time but not OFF time, the timer play or recording will finish automatically after an hour.

Notes

•The display mode will change in about 8 seconds. If the mode is changed before the setting is completed, call the mode again by pressing DISPLAY once or more.

•If you select the input other than TUNER and AUX on “2. Timer Input”, “3. Timer REC” is skipped.

2 Press TIMER to complete the timer setting.The system is put in the standby mode.•TIMER indicator lights up.If you continue using the system, press STANDBY/ ON to turn on this unit.

To cancel the timer play setting

Press DISPLAY to show the current time, then press TIMER so that “TIMER” goes off from the display. You can also cancel by pressing TIMER in standby mode.

Note

•In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock.