Yamaha CRX-E500 To connect the subwoofer (optional), SUBWOOFER OUT, 3 FM antenna, Left speaker, 2 AM antenna, Right speaker, 4 To wall outlet, Red: positive(+)

GETTING STARTED

Connecting the speakers and antennas

Never plug the AC power cord to the wall outlet until all connections are completed.

Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.

Right speaker	3 FM antenna			Left speaker
		2 AM antenna
	C
	IN
	MD
	OUT
	D	FM ANT
		75Ω UNBAL.
	A	R	L
	IN	GND
	TAPE
	OUT	AM	+
	B	ANT
	IN		– SUBWOOFER	SYSTEM
	CD		OUT	CONNECTOR
	E
	IN
	AUX	6Ω MIN./SPEAKER
	R	L	SPEAKERS
		1		4 To wall outlet

1 Connect the Speakers.1 Unscrew the knob.

2 Remove approx. 10 mm (4”) of insulation from each of the speaker wires and insert the bare wire into the terminal.

3 Tighten the knob to secure the wire.

Red: positive(+)	2
Black: negative(–)
	1

3

2 Connect the AM loop antenna.Set up the AM loop antenna, then connect it.

3 Connect the indoor FM antenna.

FM ANT

75 Ω UNBAL

4 Connect the AC power cord to a wall outlet.

Notes

•Use external FM/AM antennas if you need better reception. Consult your dealer.

•The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.

To connect the subwoofer (optional)

You can reinforce the bass frequencies by adding a subwoofer (optional).

Connect the SUBWOOFER OUT terminal of the unit to the INPUT terminal of the subwoofer.

GND

AM

ANT

5