143
CVP-202
CSelect the destination song number.
If you selected DISK1 — 1 as in step 1, press the SONG button, then
use the data dial or [–] and [+] buttons to select a destination song
number between 1 and 60. (Song numbers above 60 cannot be se-
lected.)
➔If the destination song number already contains data, the name of
the song file will appear in the middle section of the display. In this
case, the original data of the destination song number will be re-
placed by the source song data when you execute the copy opera-
tion.
VExecute the copy operation.
The copy operation cannot be executed if
the same song number is selected as
both the source song and the destination
song for the DISK1 – 1 function. In this
case, a “Select a different number!”
message will appear.
Press the COPY button.
➔The copy operation begins. If you are copying to the same disk, an
“Are you sure?” message is displayed. Press the YES button to con-
tinue or the NO button to cancel.
If you are copying the data to a different disk (or copying an entire
disk), a “Number of disk exchanges (****
****
**)” message appears to indicate
the number of times the disk will have to be changed. Press the OK
button to continue, or the CANCEL button to abort the operation.
When copying data between disks, follow the instructions in the dis-
play, inserting the source and destination disks as required.
If you are using the DISK1 – 2 function to copy a song to another
disk, the “Select destination song number” message will appear the
first time you insert the destination disk. Use the data dial or [–] and
[+] buttons to select a destination song number between 1 and 60.
(Song numbers above 60 cannot be selected.)
➾If the destination song number already contains data, the song
name will appear in the display. In this case, the original data of
the destination song number will be replaced by the source song
data. Press the OK button to continue, or CANCEL to abort.
Copying Commercial Software
• Copying of commercially available
software is strictly prohibited, except
for your personal use.
• Some commercially available software
is purposely copy-protected, and can-
not be copied using these functions.
Data files (other than those made with
the CVP-202) that have been copied
once cannot be copied a second time to
another disk. Also, additional data can be
recorded only to the right-hand/left-hand
parts of the copied DOC files.
Disk
141