153
CVP-202
■ Recall................................................................................................................................
This function can be used to recall the initial factory settings (basic
settings) for a group of parameters, or for all parameters at once.
Press the ▼ or ▲ buttons or use the data dial or [–] and [+] buttons to
select the group you want to recall, then press the START button.
FUNCTION [BACKUP 2] Display — page 14
➔An “Are you sure?” message will be displayed. Press the YES
button to recall, or NO to cancel.
The following parameter groups of the Clavinova can be recalled.
Group Description
VOICE SETTING Voice-related settings
REVERB/EFFECT Reverb, chorus, and effect settings
TUNE Master tuning, micro tuning, scale tuning
PEDAL Pedal function settings
ACMP SETTING Auto Accompaniment-related settings
SONG SETTING Settings related to the Song mode
REGISTRATION Registration data, Freeze function settings
MIDI SETTING MIDI function settings
ALL All of the above settings
Permanent Settings
The factory settings of the following
parameters are not recalled:
• Help language
• Song volume
• Backup ON/OFF
However, these and all other settings can
be reset to the initial factory values by
turning the power on while holding down
the rightmost key on the keyboard (C7).
When this is done, the “Back up data
erased and replaced by factory data”
message appears to indicate that all
backed up data has been erased and the
factory settings have been recalled. After
this message is displayed for a few sec-
onds, the main display will appear.
Refer to page 11 in the Data List for a list of the specific parameters
in each group.
Backup
151