26 CVP-202
You can change the metronome’s time signature and volume using the
settings in the METRONOME page.
■ Displaying the Metronome Settings ..............................................
To display the METRONOME page, press [DIRECT ACCESS], then
[METRONOME].
Changing the Metronome Settings
➾
➔The METRONOME display appears.
■ Setting the Beat (Time Signature)....................................................
BEAT
• Settings: NORMAL, 2 — 5
• Basic setting: NORMAL
Use the BEAT ▼ and ▲ buttons to change the time signature. (If the BEAT
function is highlighted, you can also change its settings with the data dial or the
[–] and [+] buttons.)
When NORMAL is selected, the metronome ticks steadily at the current
tempo with no accented beats.
When BEAT is set to 2, 3, 4, or 5, the metronome ticks off measures with the
selected number of beats, playing a bell sound on the first beat of each measure.
■ Setting the Metronome Volume...........................................................
VOLUME
• Range: 0 — 127
• Basic setting: 64
Use the VOLUME ▼ and ▲ buttons to change the metronome volume.
(If the VOLUME function is highlighted, you can also change its settings
with the data dial or the [–] and [+] buttons.)
The volume of the metronome is determined by both the VOLUME func-
tion and the [ACMP/SONG VOLUME] slider (except in Song mode, in
which case the volume of the metronome is not affected by the slider). If you
use the slider, the playback volume for the Automatic Accompaniment (page
50) will also be affected.
Using the Metronome
24
DIRECT ACCESS
METRONOME RESET
TEMPO