Yamaha CVP-202

CVP-202

■Cleaning the Disk Drive Read/Write

Head......................................................................................

●Clean the read/write head regularly. This instrument

employs a precision magnetic read/write head which,

after an extended period of use, will pick up a layer of

magnetic particles from the disks used that will even-

tually cause read and write errors.

●To maintain the disk drive in optimum working order

Yamaha recommends that you use a commercially-

available dry-type head cleaning disk to clean the

head about once a month. Ask your Yamaha dealer

about the availability of proper head-cleaning disks.

●Never open or close the key cover while a disk is

extending from the drive (i.e. in the ejected position).

The key cover may contact the disk,– possibily dam-

aging the disk or even the disk drive.

●Never insert anything but floppy disks into the disk

drive. Other objects may cause damage to the disk

drive or floppy disks.

■About the Floppy Disks...................................

To handle floppy disks with care:

●Do not place heavy objects on a disk or bend or

apply pressure to the disk in any way. Always keep

floppy disks in their protective cases when they are

not in use.

●Do not expose the disk to direct sunlight, extremely

high or low temperatures, or excessive humidity, dust

or liquids.

●Do not open the sliding shutter and touch the ex-

posed surface of the floppy disk inside.

●Do not expose the disk to magnetic fields, such as

those produced by televisions, speakers, motors,

etc., since magnetic fields can partially or completely

erase data on the disk, rendering it unreadable.

●Never use a floppy disk with a deformed shutter or

housing.

●Do not attach anything other than the provided labels

to a floppy disk. Also make sure that labels are at-

tached in the proper location.

To protect your data (Write-protect Tab):

To prevent accidental erasure of important data, slide the

disk’s write-protect tab to the “protect” position (tab open).

Data backup

For maximum data security Yamaha

recommends that you keep two copies of

important data on separate floppy disks.

This gives you a backup if one disk is lost

or damaged. To make a backup disk use

the Disk Copy function on page 142.

■Inserting/Ejecting Floppy Disks .............

To insert a floppy disk into the disk drive:

Hold the disk so that the label of the disk is facing

upward and the sliding shutter is facing forward, towards

the disk slot. Carefully insert the disk into the slot, slowly

pushing it all the way in until it clicks into place and the

eject button pops out.

Handling the Floppy Disk

Drive (FDD) and Floppy Disks

● Precautions

Be sure to handle floppy disks and treat the disk drive with

care. Follow the important precautions below.

● Compatible Disk Type

3.5" 2DD and 2HD type floppy disks can be used.

DISK IN USE

To eject a floppy disk:

Before ejecting the disk, be sure to confirm that the

FDD is stopped (check if the [DISK IN USE] lamp is off).

Press the eject button slowly as far as it will go; the disk

will automatically pop out. When the disk is fully ejected,

carefully remove it by hand.

DISK IN USE

DISK IN USE lamp

Never attempt to remove the disk or turn the power off

during recording, reading and playing back. Doing so can

damage the disk and possibly the disk drive.

If the eject button is pressed too quickly, or if it is not

pressed in as far as it will go, the disk may not eject prop-

erly. The eject button may become stuck in a half-pressed

position with the disk extending from the drive slot by only

a few millimeters. If this happens, do not attempt to pull

out the partially ejected disk, since using force in this

situation can damage the disk drive mechanism or the

floppy disk. To remove a partially ejected disk, try pressing

the eject button once again, or push the disk back into the

slot and then repeat the eject procedure.

Be sure to remove the floppy disk from the disk drive

before turning off the power. A floppy disk left in the drive

for extended periods can easily pick up dust and dirt that

can cause data read and write errors.