Yamaha 301, 303, CVP-305

Using a Microphone (CVP-305/303)

Adjusting the Microphone and Harmony Sound

CVP-305/303/301 Owner’s Manual 161

3Press the TAB [

√

] button to select the OVERALL SETTING tab display.

4Use the [A]–[J] buttons to select the item (parameter) (see below) to

be adjusted.

5Use the [1

ππ

ππ††

††

]–[8

ππ

ππ††

††

] buttons to set the value.

6Press the [EXIT] button to exit from the MICROPHONE SETTING dis-

play.

Adjustable Items (Parameters) in the OVERALL SETTING Tab

Display

■3BAND EQ

EQ (Equalizer) is a processor that divides the frequency spectrum into multiple

bands, which can be boosted or cut as required to tailor the overall frequency

response. The Clavinova features a high-grade three-band (LOW, MID and HIGH)

digital equalizer function for the microphone sound.

•Hz

Adjusts the center frequency of the corresponding band.

•dB

Boosts or cuts the level of the corresponding band by up to 12 dB.

■NOISE GATE

This effect mutes the input signal when the input from the microphone falls below

a speciﬁed level. This effectively cuts off extraneous noise, allowing the desired sig-

nal (vocal, etc.) to pass.

• SW (Switch)

This turns the Noise Gate on or off.

• TH. (Threshold)

This adjusts the input level at which the gate begins to open.

CAUTION

Settings in the OVERALL SET-

TING tab display are automat-

ically saved to the instrument

when you exit from the dis-

play. However, if you turn the

power off without exiting

from this display, the settings

will be lost.